Some Good Ideas

View Original

How To: Make A Scented Candle

By Earl of East

Earl of East founders, Paul Firmin and Niko Dafkos teach us how to make a Wellness Blend scented candle, created for its aromatherapeutic benefits.

This is an adapted extract from The Scented Candle Workshop by Niko Dafkos & Paul Firmin
Image: Anna Batchelo

WHAT YOU WILL NEED

  • A double-waller boiler pan or a heatproof bowl set over a pan of boiling water.

  • Digital jeweller’s scale.

  • Container soy wax – try eco-soya, advanced or 464 – you’ll need 1kg to make 5 candles.

  • Wicks – you’ll want the right size based on the diameters of the containers you’re using.

  • Containers – for this exercise, they should be the right size to hold a 200g candle.

Wellness Oil Blend

You’ll need between 6 and 12 per cent essential oils. You can adjust some of the citrusy notes as long as the overall quantities stay the same; if you don’t like lavender, try neroli, jasmine or ylang ylang instead. Remember that the throw of this candle won’t necessarily fill a room, you are creating this for its aromatherapeutic benefits.

  • 7ml lavender

  • 5ml bergamot

  • 2ml grapefruit

  • 1ml lemon

  • 1ml spearmint

  • 2ml clary sage

THE METHOD

1. Start with measuring out the wax you need and place it in the double-walled boiler pan or a heatproof bowl set over a pan of boiling water. Keep a kitchen thermometer in the part of the pan or bowl with 
the wax at all times to make sure you’re monitoring its temperature throughout the process. Do not overheat.

While the wax is melting, start preparing the oil blend and the vessels you will be pouring into.

2. Start with the vessel. Using your glue gun or stickered wicks, attach the wick to the base of the vessel, making sure it is centred in the jar. You can use a straw to help you x the wick to the base. 


3. You can now measure out the scent combination you have created. You will need a digital jeweller’s scale for this, to ensure the blend is accurate. 
By this point, your wax should have melted. Check to make sure the temperature is between 65 and 75°C. Pour the wax out into one of the metal jugs and set it aside to cool a little. Once the temperature of the wax is at a steady 65oC you can add your oil blend. Pour it in, stirring slowly clockwise and then anti-clockwise to ensure a thorough blend. We recommend then pouring it into the second metal jug and repeating this process to ensure an evenly distributed blend of oil and wax. 


4. Place your wicked jars at even intervals on a tray or on a work surface covered with greaseproof paper – this will reduce any mess from spillage. Push the wick away from the direction of the pour to the side of the vessel – this will stop the wick splitting the ow and reduce any potential spillage. You can pour in the wax to the desired height
of the vessel (we recommend leaving 1/2cm from the rim of the vessel, which is the perfect wick height – this is especially important if you are using containers with lids), or you can pour three- quarters of the way up to allow for a top pour once the vessel has set. 


5. Once you’ve poured your candles, bring the wick gently back to the centre of the vessel and use the pegs to fix the wick in the centre of your creation. You can buy wick centring devices, which are useful if the diameter of your vessel exceeds the length of a standard peg. Create some friction between the peg and vessel to ensure the wick stays in place as the wax sets. You can do this by pushing the peg against the jar and pulling the wick ever so slightly at the same time.

6. Leave the candles until cool and set, then remove the pegs or wick-centring devices, clean around the vessels if necessary and trim the wicks to size. Now put the candles aside for another 48 hours to cure. The whole thing is pretty much an exercise in patience from start to finish!

You might notice that your candles have little spots or crystals on the surface, as we have mentioned earlier, this is known as frosting and occurs frequently with soy and other vegetable wax candles. A top pour or reheating will solve this and iron out any cracks that may appear in the top layer of your candle, creating a perfect, smooth finish.

Tips

  • When melting the wax you will notice it forms a clump in the middle. Remove the pan from the heat at this point 
to avoid the wax overheating. If you 
do overheat it, make sure you allow 
the wax to cool before adding your oil blend.

  • If you have spilt any wax over the sides of your vessel during the pour, leave it until it has set. It is much easier to clean away once cooled and set.

  • You could also try using this same essential oil blend in an ultrasonic diffuser or with an oil burner.

The Scented Candle Workshop by Niko Dafkos & Paul Firmin of Earl of East was published by Kyle Books.

You can purchase their book by following the link below.

Join an Earl of East at home candle making workshop, purchased via the link below.

Discover more good ideas on making.

See this gallery in the original post